Circular roller chains
|
Mode |
Tool |
Tool set |
|
Modes for Het gereedschap ‘Plaats symbool’ |
Roller Chain - Circular
|
Machine Components |
Multiple roller chain tools share the same position on the tool set. Click and hold the mouse on the visible tool to open the Subsets list and select the desired tool.
To insert a circular roller chain:
Click the tool and mode.
Click to place the object, and click again to set the rotation. The first time you use the tool in a file, a properties dialog box opens. Set the default parameters. The parameters can be edited later from the Object Info palette.
Click to show/hide the parameters.Click to show/hide the parameters.
|
Parameter |
Description |
|
Standard Chain No. (Pitch) |
Select the standard ANSI or ISO roller chain number; the pitch is given as a reference |
|
No. of Teeth (Sprocket) |
Enter the number of teeth on the associated sprocket |
|
Pitch Diameter (Ref.) |
Displays the pitch diameter, based on the pitch value and the number of teeth |
|
Start Angle |
Specify the angle where the chain starts |
|
Number of Links |
Enter the number of links in the chain; these will be added or subtracted from the end of the chain |
|
Direction |
Select Clockwise or Counterclockwise
|
|
Start with Pin Link |
Begins the chain section with a pin link; otherwise, the section begins with a roller link |
|
Show Pins (3D only) |
Draws the pins |
|
Place Locus at Center |
Draws the roller chain with a center locus
|
Heb je niet gevonden wat je zocht? Stel je vraag aan Dex, onze virtuele assistent.